A blending system is shown in Fig. E. Liquid level h and exit composition c3 are to be controlled by adjusting flow rates q1 and q3. Based on the information below, do the following:
(a) Derive the process transfer function matrix, Gp(s).
(b) If a conventional multiloop control system is used, which controller pairing should be used? Justify your answer,
(c) Obtain expressions for the ideal decouplers D21(s) and D12(s) in the configuration of Fig.
Available Information
(i) The tank is 3 ft in diameter and is perfectly mixed.
(ii) Nominal steady-state values are:
(iii) The density of each process stream remains constant at ? = 60 lb/ft3.
(iv) The primary disturbance variable is flow rate q2
.
(v) Inlet compositions C1 and C2 arc constant.
(vi) The transmitter characteristics are approximated by the following transfer functions with time constants in minutes:
(vii) Each control valve has a gain of 0.15 ft3/ min mA and a time constant of l0 s.
![]()
(a) Derive the process transfer function matrix, Gp(s).
(b) If a conventional multiloop control system is used, which controller pairing should be used? Justify your answer,
(c) Obtain expressions for the ideal decouplers D21(s) and D12(s) in the configuration of Fig.
Available Information
(i) The tank is 3 ft in diameter and is perfectly mixed.
(ii) Nominal steady-state values are:
(iii) The density of each process stream remains constant at ? = 60 lb/ft3.
(iv) The primary disturbance variable is flow rate q2
.
(v) Inlet compositions C1 and C2 arc constant.
(vi) The transmitter characteristics are approximated by the following transfer functions with time constants in minutes:
(vii) Each control valve has a gain of 0.15 ft3/ min mA and a time constant of l0 s.
ScholarMatic: Explanation & Answer
Your ready answer from a verified tutor is just a click away for as little as $14.99
Click Order Now to get 100% Original Answer Customized to your instructions!
