UTS MICRO WAVE TANK DRAWINGS Internal wave tank width = 0.9 m Designed for 1 s waves at 100mm waveheight. Paddle on left, overtopping beach on right. 0.7 mgapEND VIEWSIDE VIEWTANK (SIDE AND BOTTOM PANELS TO BE FITTED AFTER STEEL ERECTION)4.9 mOuter lengthPlans for Steelwork for New Micro Wavetank in CB 2.02.070.8 mOn centre1.6 mOn centre1.1 m1.8 m1.1 mOuter length0.5mMaterialsMaterials nominally specified as 100 mm box section and 100 mm angle section. This can be reduced if necessary if still deemed strong enough, There will be up to 2200 Kg of water in the tank when full. All uprights and 6 horizontal stretchers (shown) are 100 mm box section steel:8 uprights ´ 1.8 m + 6 uprights ´ 0.7 m + 6 stretchers ´ 1.1 m = 25.2 m of 100 mm square box sectionAll other components are 100 mm angle section: 6 runners ´ 4.9 m + 8 diagonal bracers ´ 0.91 m + 7 stretchers ´ 1.1 m = 44.38 m of 100 mm angle sectionConstruction: To be welded or bolted as requiredOne diagonal bracer on back side and one on front side D G Dorrell1 June 2011