Please, please, please ,please, solve this assignment ,This is my final project .This is part one.
I need your help to solve my assignment. i need to submit it in Thursday. Please, solve , and make good drawings. Also, try to give me more information. Try to do client ‘s requirement .
Please if you find figure 1 or figure 2 not clear, ask me to send you again.
Scenario This is a real case project: Client is considering building a four story dual usage flats suitable for both residential and office usage to replace an existing two story building. Therefore in the first place existing building should be demolished. As it is shown in Figure 1, total available land is 106.91 m2. Local council allows 70% of the land to undergo construction for each level. Maximum four story building is permitted in this area and indoor parking should be provided for each flat. In other words if you cannot provide a parking you have to reduce the number of stories. Land is extremely valuable in this area therefore to win this job you need to consider innovative approach to reduce the waste areas. In commercial sense, waste area will be staircase and space taken by elevators as client cannot charge for these areas. Figure 2 shows indicative example of Architectural plan for one floor. Additional information: Parking should be considered in the ground floor, clear height of the ground floor should be 2.5m Clear height in each level apart from the ground floor should be 3.0 m You need to provide demolition strategy as another building is attached to this building along the longer length of the land 17.80m. Flat roof should be considered for this structure and you need to think innovatively to use the roof space for service units e.g. A/C. It will be a consultant choice to use steel or concrete structure however you have to convince the client with supportive argument e.g. space. The design has to fully consider the implication of planning permission. As consultant you should provide overall material cost for this project. You will work on this project as a team of two or individual where Cost analysis, Economic evaluation, Drawing, Structural analysis and design, Presentation and Final report will be shared equally. Assignment 1. To conduct the clientâs requirement to capture and produce a design briefing to target on the clientâs requirements. 2….





